Fluke Corporation                                           MET/CAL Procedure
=============================================================================
INSTRUMENT:            Sub Fluke 884xA Wait for Cal Step Complete
DATE:                  31-Mar-95
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       24
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
#
# Prior to calling this procedure, MEM1 should be set the timeout in seconds.
#
# Serial Poll 884xA with a mask of 8 (Cal Step Complete).
  1.001  IEEE         [D1000][SPL 8]
# Check response for a 1 (bit set).
  1.002  MEME
  1.003  JMPT         1.007
# Check to see if timed out waiting for Cal Step Complete.
  1.004  MEME
  1.005  MATH         MEM1 = MEM1 - 1
  1.006  JMPT         1.001
  1.007  END